Navilock NL-443P MD6 GPS Receiver SiRFstarIV™
Description
The GPS Receiver based on SiRFstarIV™ chipset has a built-in antenna for high sensitivity. The MD6 universal connector enables the connection of optional USB or serial connecting cables. You can use this GPS Receiver with a Car PC or a notebook and a suitable routing software for navigation.
Specification
- SiRFstarIV™ GSD4e chipset
- GPS receiver with MD6 Navilock connector
(USB or serial cable are optional available) - Frequency: L1, 1575.42 MHz, C/A Code: 1.023 MHz
- Accepts the signals of up to 48 satellites at the same time
- Supports WAAS, EGNOS and MSAS
- Supports NMEA 0183 V3.0 protocols: GGA, GSA, GSV, RMC, VTG,
GLL v2.2 (VTG and GLL are optional) - 4800 ~ 38.400 baud rate
- Update rate: 1 Hz
- Datum: WGS-84
- Sensibility max. –163 dBm
- IPX6 protection class
- Magnatic, non-slip on the bottom
- LED-indicator for GPS-status
- Operating temperature: -20 °C to +65 °C
- Cold start in about 35 sec.
- Hot start in about 1 sec.
- Positioning accuracy: < 2.5 m 2D RMS SBAS Enable
- Dimension (LxWxH): 65 mm x 45 mm x 22 mm
System requirements
- Windows 2000/XP/Vista/7/8,
Windows Mobile 2003/5/6
Linux ab Kernel 2.6,
Mac OS 10.6.x, 10.7.x - MD6 connection cable
Package content
- NL-443P receiver
- User manual on CD ROM
Package
- Retail Box
12.07.2017
Datenblatt
12.07.2017
Data sheet
12.07.2017
Feuille de données
12.07.2017
Hoja de datos
20.12.2012
User Manual (English)
297.96 kB
20.12.2012
User Manual (German)
293.19 kB
optional connection cable
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.
Navilock Connection Cable MD6 Serial > D-SUB 9 Serial For GNSS Receiver
Item No. 61265
Navilock Connection cable MD6 > USB for GNSS Receiver
Item No. 61264