Navilock Connecting Cable MD6 Serial > D-SUB 9 Serial for GNSS Receiver with PPS
Description
Serial Navilock GNSS receiver possess an MD6 universal connector. The pin assignment of this connector is identical with chipsets by u-blox and SiRF. In order to connect the GNSS receiver to a serial port you need this specific connecting cable. The data protocol will be provided by the D-SUB 9 plug. On pin 6 you can analyze the PPS TTL signal from u-blox 8 receivers. Over opend cable end you connect the receiver to 5 V DC.
Note
The following Navilock GNSS receiver can be supplied via the open end of the cable with a voltage in range 5 V to 48 V DC:
• 62665 NL-82004P
• 62755 NL-82022MP
Spécifications techniques
- Connector: MD6 jack, D-SUB 9 jack, open cable end
- Power supply via open cable end
red: +5 V
black: GND - Length: 6 pin connecting cable ca. 59 cm (including connector)
- Length: open cable ca. 39 cm
Configuration système requise
- Navilock serial MD6 GNSS receiver
- One free D-Sub9 plug
Contenu de l’emballage
- Connecting cable for GNSS receiver
Emballage
- Poly bag
optional receivers:
Tous les noms et images mentionnés ici sont la propriété de leur fabricant respectif. Sous réserve d’erreurs et de modifications.
Navilock Récepteur Multi GNSS Série MD6 NL-8003P u-blox 8 1,50 m
N° produit 62525
Navilock Récepteur Multi GNSS Série MD6 NL-8005P u-blox 8 5 m
N° produit 62526
Navilock NL-8004P Récepteur Multi GNSS Série PPS MD6 NL-8004P u-blox 8 5 m
N° produit 62527
Navilock NL-8044P MD6 Série Multi GNSS Récepteur u-blox 8 10 m
N° produit 62528
Navilock Récepteur Multi GNSS Série PPS MD6 NL-8022MP u-blox 8 5 m
N° produit 62529
Navilock Récepteur Multi GNSS Série PPS MD6 NL-8222MP u-blox 8 10 m
N° produit 62530