Navilock Connecting Cable MD6 Serial > D-SUB 9 Serial for GNSS Receiver with PPS
Item No. 62621
1
This product is not available anymore.
1 Description
Serial Navilock GNSS receiver possess an MD6 universal connector. The pin assignment of this connector is identical with chipsets by u-blox and SiRF. In order to connect the GNSS receiver to a serial port you need this specific connecting cable. The data protocol will be provided by the D-SUB 9 plug. On pin 6 you can analyze the PPS TTL signal from u-blox 8 receivers. Over opend cable end you connect the receiver to 5 V DC.
Note
The following Navilock GNSS receiver can be supplied via the open end of the cable with a voltage in range 5 V to 48 V DC:
• 62665 NL-82004P
• 62755 NL-82022MP
Technical details
- Connector: MD6 jack, D-SUB 9 jack, open cable end
- Power supply via open cable end
red: +5 V
black: GND - Length: 6 pin connecting cable ca. 59 cm (including connector)
- Length: open cable ca. 39 cm
System requirements
- Navilock serial MD6 GNSS receiver
- One free D-Sub9 plug
Package content
- Connecting cable for GNSS receiver
Package
- Poly bag
Technical pictures
optional receivers:
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.
Navilock NL-8003P MD6 Serial PPS Multi GNSS Receiver u-blox 8 1.5 m
Item No. 62525
Navilock NL-8005P MD6 Serial Multi GNSS Receiver u-blox 8 5 m
Item No. 62526
Navilock NL-8004P MD6 Serial PPS Multi GNSS Receiver u-blox 8 5 m
Item No. 62527
Navilock NL-8044P MD6 Serial Multi GNSS Receiver u-blox 8 10 m
Item No. 62528
Navilock NL-8022MP MD6 Serial PPS Multi GNSS Receiver u-blox 8 5 m
Item No. 62529
Navilock NL-8222MP MD6 Serial PPS Multi GNSS Receiver u-blox 8 10 m
Item No. 62530