Navilock NL-852ERS PPS u-blox 8 Multi GNSS Engine Module
Item No. 62576
Overview
Description
GNSS modules are fully assembled receiver with patch antenna, backup battery etc .. This version uses RS232.Technical details
- Connector: WTB serial RS-232, 6 pin, pitch 1.0 mm
- u-blox 8 UBX-M8030-KT chipset
- Frequency:GPS: L1, 1575.4200 MHzGLONASS: L1, 1602 (k x 0,5625) MHzBEIDOU COMPASS: B1, 1561.0980 MHzGALILEO E1, 1575.4200 MHzQZSS L1, 1575.4200 MHz
- Accepts the signals of up to 72 satellites at the same time
- Supports AssistNow online/offline,SBAS (WAAS, EGNOS, QZSS and MSAS)
- Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
- Auto Baud Rate up to 115200 bps
- TTL 3.3 V PPS signal on Pin 6
- Update rate:
single GNSS: 18 Hz (e.g. GPS solo)multi GNSS: 10 Hz (e.g. GPS + GLONASS) - Sensibility max. –167 dBm
- LED-indicator for GPS-status
- Operating temperature:
-40 °C ~ 85 °C without battery-20 °C ~ 60 °C with battery - Power supply: 5 Volt
- Current consumption: max. 45 mA
- Cold start in ca. 26 seconds
- Hot start in ca. 1 second
- Positioning accuracy:
2.5 m CEP (Circular Error Probable) and2.0 m CEP with SBAS - Dimension (LxWxH): ca. 30,0 x 30,0 x 7.90 mm
System requirements
- Device with free RS232 input
Package content
- GNSS module
Package
- Poly bag
Features
Interface
Connector
- 1 x 6 Pin RS-232 WTB, pitch 1.00 mm
Technical characteristics
Operating voltage
- 5 V DC
Chipset
- u-blox 8 UBX-M8030-KT
Frequency range
- BEIDOU: B1, 1561.0980 MHz
- QZSS L1, 1575.4200 MHz
- GALILEO: E1 1575.4200 MHz
- GPS: L1, 1575.4200 MHz
- GLONASS: L1, 1602 (k x 0.5625) MHz
Operating temperature
- -20 °C ~ 60 °C
- -40 °C ~ 85 °C withour battery
Current consumption
- 45 mA
Sensitivity
- -167 dBm
Update rate
- up to 18 Hz
Physical characteristics
Length
- 30 mm
Width
- 30 mm
Height
- 7.9 mm
Documents
Data sheet
02.10.2025
Download all data sheets (takes about 1 minute)
02.10.2025
CE - Declaration of conformity
15.02.2023
248.24 kB
ublox U-CENTER documentation
29.07.2016
4.01 MB
ublox-8 Referenzmanual
29.07.2016
7.14 MB
User Manual (English)
01.06.2015
1.11 MB
User Manual (German)
01.06.2015
1.12 MB
FAQ
Galileo (satellite navigation)
The European navigation system Galileo will start probably at the end of 2016 and will become full operational capability (FOC) in 2020. Our Navilock u-blox 8 receivers support Galileo since the firmware version 3.01.
The new GNSS system requires the version 4.1 of the NMEA 0183 protocol. The evaluation software uCenter displays the Galileo satellites.
Please notice the instruction for this update.
Option PPS (Pulse Per Second)
The Pulse-Per-Second (PPS) signal is available on the mini DIN connector at PIN 6. It is synchronized with UTC. A flexible power supply for PPS provides the integrated Darlington circuit and a pull-up resistor of 10 KOhm.
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.