Service

Support Form Contact form Documents Driver FAQ Declarations of conformity

FAQ

Bluetooth

Bluetooth Compatibility Connect Bluetooth at the Computer (Windows) Connect Bluetooth at the Handy, Tablet, etc. (Android) Connect Bluetooth by Windows CE/Apple and the mobile phone Driver and Bluetooth

Cable and Accessories

Battery Connector MD6 and RS232 assignment (pin out)

Firmware

Firmware version 3.01 u-blox M8 Standard Precision-GNSS GALILEO

GNSS Receiver

Airplan Mode für uBlox Reciever BT-413 AGPS NL-302U, PN 61422, Windows Compatible

Interface and Driver

COM Port Show Advanced COM Port Access Rights COM Port Configure or Change COM Port doesn't Exist or Appear How can I Check the Installation? Jumping Mouse New Location Sensor Driver for Windows 7/8/8.1 Online Latest Driver

uBlox-Center GLONASS or GPS for ublox 7

Is it possible to receive GLONASS or GPS?

You can receice GPS or GLONASS. The required configuration will described in the following.

61973 Navilock NL-662U USB 2.0 GLONASS GPS receiver u-blox6
6 1974 Navilock NL-663P MD6 GLONASS GPS receiver u-blox 6
61975 Navilock NL-664P seriell MD6 GLONASS GPS receiver u-blox 6 Outdoor
61976 Navilock NL-682MP seriell MD6 GLONASS GPS receiver u-blox 6 Outdoor Marine

1.Connect the receiver to the uCenter.

2.Open the "View Configuration View" in the menu.

3. Configure the parameters in the right side of the screenshot.
4. Click on "Send".
5. Open "View Configuration View" in the menu.

6. Select "Save current configuration".
7. For permanent saving click "Send".
8. Done. The NL-682MP receives GPS.