Navilock NL-8044P MD6 Serial Multi GNSS Receiver u-blox 8 10 m

Item No. 62528
62528 Navilock NL-8044P MD6 Serial Multi GNSS Receiver u-blox 8 10 m
62528
62528 Navilock NL-8044P MD6 Serial Multi GNSS Receiver u-blox 8 10 m small 1
62528 small 2

Description

The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-8044P GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design.


Specification

  • Connector:
    MD6 Navilock plug (RS-232) (USB or serial cable are optional available)
  • Chipset: u-blox 8 UBX-M8030-KT
  • Frequency:
    GPS: L1, 1575.4200 MHz
    GLONASS: L1, 1602 (k x 0.5625) MHz
    BEIDOU COMPASS: B1, 1561.0980 MHz
    GALILEO: E1, 1575.4200 MHz
    QZSS: L1, 1575.4200 MHz
  • Accepts the signals of up to 72 satellites at the same time
  • Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
  • Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
  • Auto Baud Rate up to 115200 bps
  • PPS signal on pin 6 (LVTTL 3.3 V)
  • Update rate:
    single GNSS: 18 Hz (e.g. GPS solo)
    multi GNSS: 10 Hz (e.g. GPS+GLONASS)
  • Sensibility: max. -167 dBm
  • Protection class: IPX7
  • Operating temperature: -20 °C ~ 60 °C
  • Power supply: 5 V DC
  • Cold start in ca. 26 seconds
  • Hot start in ca. 1 second
  • Positioning accuracy:
    2.5 m CEP (Circular Error Probable)
    2.0 m CEP with SBAS (Circular Error Probable)
  • Cable length: ca. 10 m
  • Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm

    Microsoft Sensor and Location Platform (Website)
  • Profit from Windows applications (e.g. weather, maps, etc)
  • Supporting the GNSS location platform API (32 bit)


System requirements

• Windows Vista/7/8/8.1/10, Linux Kernel 2.6, Mac OS X
• MD6 connection cable


Package content

  • MD6 serial receiver
  • Mounting material: stainless steel nut and washer
  • Navilock support CD incl. driver and user manual


Package

  • Box

Galileo (satellite navigation) The European navigation system Galileo will start probably at the end of 2016 and will become full operational capability (FOC) in 2020. Our Navilock u-blox 8 receivers support Galileo since the firmware version 3.01.

The new GNSS system requires the version 4.1 of the NMEA 0183 protocol. The evaluation software uCenter displays the Galileo satellites.

Please notice the instruction for this update.
Option PPS (Pulse Per Second) The Pulse-Per-Second (PPS) signal is available on the mini DIN connector at PIN 6. It is synchronized with UTC time. A flexible power supply for PPS provides the integrated Darlington circuit and a pull-up resistor of 10 KOhm.
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.