ProductsReceiverGALILEO62526 Navilock NL-8005P MD6 Serial Multi GNSS Receiver u-blox 8 5 m

Navilock NL-8005P MD6 Serial Multi GNSS Receiver u-blox 8 5 m

Item No. 62526
picture
picture

Description

The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables.


Specification

• Connector: MD6 Navilock plug (RS-232) (USB or serial cable are optional available)
• Chipset: u-blox 8 UBX-M8030-KT
• Frequency:
  GPS: L1, 1575.4200 MHz
  GLONASS: L1, 1602 (k x 0.5625) MHz
  BEIDOU COMPASS: B1, 1561.0980 MHz
  GALILEO: E1, 1575.4200 MHz
  QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto Baud Rate up to 115200 bps
• PPS signal on pin 6 (LVTTL 3.3 V)
• Update rate:
  single GNSS: 18 Hz (e.g. GPS solo)
  multi GNSS: 10 Hz (e.g. GPS+GLONASS)
• Sensibility max. -167 dBm
• IPX6 protection class
• Magnetic, non-slip on the bottom
• LED-indicator for GPS status
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 5 m
• Dimensions (LxWxH): ca. 65 x 45 x 22 mm
 
Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)


System requirements

• Windows Vista/7/8/8.1/10, Linux Kernel 2.6, Mac OS X
• MD6 connection cable


Package content

• MD6 serial receiver
• Navilock support CD incl. driver and user manual


Package

• Retail Box

Galileo (satellite navigation) The European navigation system Galileo will start probably at the end of 2016 and will become full operational capability (FOC) in 2020. Our Navilock u-blox 8 receivers support Galileo since the firmware version 3.01.

The new GNSS system requires the version 4.1 of the NMEA 0183 protocol. The evaluation software uCenter displays the Galileo satellites.

Please notice the instruction for this update.
Option PPS (Pulse Per Second) The Pulse-Per-Second (PPS) signal is available on the mini DIN connector at PIN 6. It is synchronized with UTC time. A flexible power supply for PPS provides the integrated Darlington circuit and a pull-up resistor of 10 KOhm.
optional connection cable
Navilock Connection Cable MD6 Serial > D-SUB 9 Serial For GNSS Receiver
61265
Navilock Connection cable MD6 > USB for GNSS Receiver
61264
Navilock Connecting Cable MD6 Serial > D-SUB 9 Serial for GNSS Receiver with PPS
62621
Navilock Connection Cable MD6 female serial > Micro-Fit 4 pin male 52 cm
62932
Navilock Connection Cable MD6 female serial>2.5 mm 3 pin stereo jack male 90° TTL (5 V) 52 cm
62886
Navilock Connection Cable MD6 female serial > 2.5 mm 4 pin stereo jack male 90° LVTTL (3.3 V) 52 cm
62924
Navilock Connection Cable MD6 female serial > 2.5 mm 4 pin stereo jack male 90° TTL (5 V) 52 cm
62881
Navilock Connection Cable MD6 female serial > 3.5 mm 3 pin stereo jack male 90° LVTTL (3.3 V) 52 cm
62925
Navilock Connection Cable MD6 female serial> 3.5 mm 4 pin stereo jack male 90° LVTTL (3,3 V) 52 cm
62926
Navilock Connection Cable MD6 female serial> 5 x open wire LVTTL (3.3 V) 52 cm
62928
Navilock Connection Cable MD6 female serial > USB Type-C™ 2.0 male 52 cm
62879
Navilock Connection Cable MD6 female serial > 5 pin pin header, pitch 2.54 mm LVTTL (3.3 V) 52 cm
62929
Navilock Connection Cable MD6 serial > RJ11 male 52 cm
62882
Navilock Connection Cable MD6 female serial > RJ45 male 52 cm
62931
Navilock Connection Cable MD6 female serial > 2.5 mm 3 pin stereo jack male 90° LVTTL (3.3 V) 52 cm
62923
Navilock Connection Cable M8 6 pin female waterproof > MD6 male RS-232 0.2 m
64047
Navilock Connection Cable MD6 Serial > D-SUB 9 Serial for GNSS Receiver with power supply via USB
62907

To the top