Delock USB 2.0 Camera Module 3.14 mega pixel 80° V5 fix focus

Item No. 95978

Overview

Description

This USB 2.0 camera module by Delock offers in a compact construction a high resolution and low power consumption. It is ideally suited for installation in industrial components like IPCs, embedded systems, sensors and in device manufacture. The use of a photosensitive sensor with back side illumination (BSI) expands the scope of this module.

Technical details

Connector: 1 x 5 pin USB 2.0 pin header female SMT, pitch 1.00 mm
Resolution: 3.14 megapixel
With optical IR filter
Standard SCCB interface (I²C Bus)
Output support for RAW RGB, RGB565/555/444, CCIR656, YUV422/420, YCbCr422
and compression
Maximum resolution: QXGA (2048 x 1536)
Automatic image control functions including:
  Automatic exposure control (AEC)
  Automatic white balance (AWB)
  Automatic band filter (ABF)
  Automatic black-level calibration (ABLC)
Image quality controls including colour saturation, gamma, sharpness (edge
enhancement), lens correction, white pixel canceling, noise canceling, and automatic
50 / 60 Hz luminance detection
Supports scaling
Power consumption:
Sensor suspend: 90 mA
sensor active: 430 mA ± 5 mA @ 640 x 480 pixel
Operating voltage: 5 V DC
Operating temperature: 5 °C ~ 50 °C
Operating humidity: ≤ 80 %
Sensor size: 1/4"
Sensitivity: 0.6 V / lx s
Signal-to-noise ratio (SNR): ca. 36 dB
Dynamic range: 68 dB
Fix focus: 0.3 m - infinite
Aperture: F/2,5
Frame rates:
30 fps @ HVGA, VGA, XGA, 720p, QVGA
15 fps @ UXGA, 1080p, QXGA
Dimensions (LxWxH): ca. 60 x 8 x 13 mm