Navilock NL-82052RS Multi GNSS UDR u-blox NEO-M8U PPS engine module

Overview

Description

GNSS modules are fully assembled receiver with patch antenna, backup battery etc .. This version uses RS-232. Several integrated sensors allow position determination without GNSS signals. The manual contains essential installation and commissioning conditions for the successful operation of this GNSS module!

Technical details

• Connector: WTB serial RS-232
  
• u-blox NEO-M8U module
  
• Frequency:
      GPS: L1, 1575.4200 MHz
      GLONASS: L1, 1602.5625 ~ 1615.5000 MHz
      BEIDOU COMPASS: B1, 1561.0980 MHz
      GALILEO E1, 1575.4200 MHz
      QZSS L1, 1575.4200 MHz
  
• Accepts the signals of up to 72 satellites at the same time
  
• Supports AssistNow online/offline,
      SBAS (WAAS, EGNOS, QZSS and MSAS)
  
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
  
• Supports UDR from NMEA 4.1
  
• TTL 3.3 V PPS signal on Pin 6
  
• Auto Baud Rate up to 115200 bps
  
• Update rate: up to 20 Hz
  
• Sensibility max.: –160 dBm
  
• LED-indicator for GPS status
  
• Operating temperature:
      -40 °C ~ 85 °C without battery
      -20 °C ~ 60 °C with battery
  
• Power supply: 5 - 48 V DC
  
• Current consumption: max. 45 mA
  
• Cold start in ca. 26 seconds
  
• Hot start in ca. 1 second
  
• Positioning accuracy:
      2.5 m CEP (Circular Error Probable)
      2.0 m CEP with SBAS (Circular Error Probable)
  
• Dimension (LxWxH): ca. 30.0 x 30.0 x 7.90 mm

System requirements

• Device with a free RS-232 connector

Package content

• Engine module
   

Package

• Poly bag