Navilock NL-8022MU USB 2.0 Multi GNSS Receiver u-blox 8 4.5 m

Översikt

Beskrivning

The USB 2.0 multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation. The NL-8022MU GNSS receiver is especially designed for installation on a white ground (boat, camper, bus etc.) It is unremarkable and fits into the vehicle concept due to its housing design.

Specifikationer

• Connector: USB 2.0 Type-A male
  
• Chipset: u-blox 8 UBX-M8030-KT
  
• Frequency:
    GPS: L1, 1575.4200 MHz
    GLONASS: L1, 1602 (k x 0,5625) MHz
    BEIDOU COMPASS: B1, 1561.0980 MHz
    GALILEO: E1, 1575.4200 MHz
    QZSS: L1, 1575.4200 MHz
  
• Accepts the signals of up to 72 satellites at the same time
  
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
  
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
  
• Auto Baud Rate up to 115200 bps
  
• Update rate:
    single GNSS: 18 Hz (e.g. GPS solo)
    multi GNSS: 10 Hz (e.g. GPS+GLONASS)
  
• Sensibility max. -167 dBm
  
• IPX7 protection class
  
• Operating temperature: -20 °C ~ 60 °C
  
• Power supply: 5 V DC
  
• Current consumption: max. 45 mA
  
• Cold start in ca. 26 seconds
  
• Hot start in ca. 1 second
  
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
  
• Cable length: ca. 4.5 m
  
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
  
  Microsoft Sensor and Location Platform (Website)
  
• Profit from Windows applications (e.g. weather, maps, etc)
  
• Supporting the GNSS location platform API (32 bit)

Systemkrav

• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
  
• PC or laptop with a free USB Type-A port
  
• For devices with OTG function and optional OTG adapter: Windows 10

Paketets innehåll

• USB 2.0 receiver
  
• Mounting material: stainless steel nut and washer
  
• Navilock support CD incl. driver and user manual

Paket

• Retail Box