Navilock NL-8044P MD6 Serial Multi GNSS Receiver u-blox 8 10 m
Description
The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-8044P GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design.
Technical details
- Connector:
MD6 Navilock plug (RS-232) (USB or serial cable are optional available) - Chipset: u-blox 8 UBX-M8030-KT
- Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz - Accepts the signals of up to 72 satellites at the same time
- Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
- Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
- Auto Baud Rate up to 115200 bps
- PPS signal on pin 6 (LVTTL 3.3 V)
- Update rate:
single GNSS: 18 Hz (e.g. GPS solo)
multi GNSS: 10 Hz (e.g. GPS+GLONASS) - Sensibility: max. -167 dBm
- Protection class: IPX7
- Operating temperature: -20 °C ~ 60 °C
- Power supply: 5 V DC
- Cold start in ca. 26 seconds
- Hot start in ca. 1 second
- Positioning accuracy:
2.5 m CEP (Circular Error Probable)
2.0 m CEP with SBAS (Circular Error Probable) - Cable length: ca. 10 m
- Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website) - Profit from Windows applications (e.g. weather, maps, etc)
- Supporting the GNSS location platform API (32 bit)
System requirements
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6, Mac OS X
• MD6 connection cable
Package content
- MD6 serial receiver
- Mounting material: stainless steel nut and washer
- Navilock support CD incl. driver and user manual
Package
- Box
15.02.2023
Data sheet
15.02.2023
CE - Declaration of conformity
248.28 kB
25.01.2019
Technical drawing
1.37 MB
12.01.2015
User Manual (English)
509.61 kB
12.01.2015
User Manual (German)
509.55 kB
Software
20.04.2016
Eine leistungsstarke Software für die Analyse, Konfiguration, Entwicklung unserer GNSS ublox-Module und Empfänger.
11.79 MB
Software
05.03.2018
02.03.2017
11.79 MB
Eine leistungsstarke Software für die Analyse, Konfiguration, Entwicklung unserer GNSS ublox-Module und Empfänger.
20.86 MB
Galileo (satellite navigation)
The European navigation system Galileo will start probably at the end of 2016 and will become full operational capability (FOC) in 2020. Our Navilock u-blox 8 receivers support Galileo since the firmware version 3.01.
The new GNSS system requires the version 4.1 of the NMEA 0183 protocol. The evaluation software uCenter displays the Galileo satellites.
Please notice the instruction for this update.
The new GNSS system requires the version 4.1 of the NMEA 0183 protocol. The evaluation software uCenter displays the Galileo satellites.
Please notice the instruction for this update.
Option PPS (Pulse Per Second)
The Pulse-Per-Second (PPS) signal is available on the mini DIN connector at PIN 6. It is synchronized with UTC time. A flexible power supply for PPS provides the integrated Darlington circuit and a pull-up resistor of 10 KOhm.
optional connection cable
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.
Navilock Connection Cable MD6 Serial > D-SUB 9 Serial for GNSS Receiver with power supply via USB
Item No. 62907
Navilock Connection Cable MD6 Serial > D-SUB 9 Serial For GNSS Receiver
Item No. 61265
Navilock Connection cable MD6 > USB for GNSS Receiver
Item No. 61264
Navilock NL-8005P MD6 Serial Multi GNSS Receiver u-blox 8 5 m
Item No. 62526
Navilock NL-8004P MD6 Serial PPS Multi GNSS Receiver u-blox 8 5 m
Item No. 62527